Self-propelled grain combine harvester 4LZ-8C(G4)

Combine Harvester 4LZ-8C(G4)

Key points of operation:

Careful operation is an important part of improving the working efficiency of rice combine harvesters. The majority of agricultural machinery operators in the 859th Farm of Heilongjiang Agricultural Reclamation pay special attention to the following two points when driving rice combine harvesters to harvest rice, and have achieved good results. They are introduced as follows: Straight-line driving When the harvester is operating, the agricultural machinery operator should operate the harvester in a straight line. In this way, one can improve the working efficiency, and the other can reduce the waste of rice during the harvester operation. Forward speed According to the growth, yield, dryness and wetness of rice, and the dryness and hardness of the rice field, control the forward speed of the harvester operation, so that the harvester can operate at full load as much as possible to improve the working efficiency. If the rice grows well and the yield is high, the harvester can operate slower. If the rice field is dry and hard, the operation speed can be faster during harvesting.

Technical Feature：

1.2.75m cutting table, optional grain cutting table, sorghum, flexible cutting table, can harvest wheat, corn, sorghum, soybeans and other crops

2.With beautiful shape and lightweight body.  The streamlined body is more in line with the aesthetics of modern agricultural machine operators.

3.Weichai 190 HP engine and 350L rotunded-plastic fuel tank to make long continuous operation time.

4.5m turning radius, fast turning.The unloading height is 3.2 meters, the unloading vertical cylinder is thickened, and the horizontal pass is thickened to 270mm, and the unloading speed is fast.

5.Using Hydraulic CVT, travel speed up to 40km/h, faster transfer speed;  One bar control, the new cutting table one key return, to ensure that the cutting height is unified.

6.Chassis frame adopts 16 manganese profile, high strength, more durable, large torque closed wheel reducer, strong bearing capacity, long-distance cross-region operation is guaranteed

7.2.69m longitudinal axial flow roller, more suitable for high-yield crops. The speed (350, 450, 700r/min) is adjustable in three gears, and the concave gap is adjustable in six gears. The harvest effect of different crops is good.

8.The key parts of drive shaft assembly, threshing drum assembly front end, bridge drive shaft, grain level auger, miscellaneous level auger and so on are made of peel bearings.

9.The transmission belt adopts black one-tooth belt, which has high transmission efficiency, good heat dissipation and no slip.

Technical Specification：