Our production of protective film with glue can cover high, medium, low viscosity three technical characteristics of protective film special emulsion glue. It has the excellent performance of solvent-based glue.
Product Description
Product model: Theonetop ĐE-80M
1. Product ntroduction
Our production of protective film with glue can cover high, medium, low viscosity three technical characteristics of protective film special emulsion glue. It has the excellent performance of solvent-based glue. Compared with solvent-based glue, it has the advantages of no air pollution, tasteless, non-toxic, easy to operate and high solid content. This product has one component and two components of two categories of acrylic emulsion glue. BOPP/PET/PE/PP/ aluminized PET composite film, PVC protective film and other products made of the glue have the following advantages:
According to the different protected surface, by adjusting the ratio of glue and additives into different adhesive protective film glue.
Good aging resistance, including high temperature resistance, high humidity resistance, UV linearity are very good. At the same time, the problem of poor water resistance of the protective film made of water glue is solved.
2. Product Features and Instructions
The difference between single-component glue and two-component glue:
In general, the single-component glue does not need to be equipped with additives, simple operation and easy to use, but its adhesive force is weaker than the two-component glue, which is suitable for small range, medium and low strength and specific adhesive needs;
The two-component glue can be matched according to the different needs of customers, with high strength and stability, but its operation process is more complex, requiring the guidance and operation of professional knowledge.
The use of two-component glue reference ratio: (The table listed in the following table for different protected surfaces, recommended glue ratio and viscosity data, for reference only.)
The two-component glue operation method and precautions: the two components need to add different proportions of auxiliaries before use according to the different stickiness (bonding different substrates) required by customers. In the case of mechanical mixing, add quantitative additives at a slow speed, and then stir for 3-5 minutes after adding the additives, so that it is evenly dispersed in the glue. The prepared glue is added to the glue tank through the filter, and the undispersed glue block is filtered out. The safe use period of the prepared glue is 4-6 hours, so it is necessary to ensure that the prepared glue is used up within this period, so as not to affect the use of the glue after curing.
Glue ratio (Glue: additive) |
Amount of glue applied(Dry glue)um |
180peel(N/in),20min |
Recommended protection surface |
100:0.3 |
3~10 |
1.5~2.0 |
Stainless steel, aluminum alloy, ordinary aluminum-plastic plate, glass |
100:0.2 |
10~16 |
2.0~3.0 |
spraying aluminum-plastic plate |
100:0.1 |
16~20 |
3.0~4.5 |
coarse sand aluminum alloy |
3. Product Performance Indicators
Emulsion appearance |
milky white liquid |
PH value |
7.0 to 9.0 |
Viscosity (mpa/s) |
40~120 |
Peeling force (N/25mm) |
3~8.5 |
Initial adhesion (GB) |
12-20# steel ball |
Holding force (H) |
-- |
Solid content (%) |
55±1% |
Good mechanical |
stability |
The appearance of film is transparent
4. Packing, storage and transportation
The packaging specifications of this product are 200kg/1000kgIBC plastic drum packaging or air bag container packaging.
This product is non-toxic, non-combustible, non-dangerous goods, for details, please refer to the product safety technical manual.
This product should be stored in a closed container, avoid freezing and high temperature, prevent rain, sun exposure. The optimal storage temperature is between 4 ° C and 35 ° C, and under the above conditions, the effective storage period is six months from the date of production.
Be careful when transporting, do not invert, avoid collision and fall.
Email: postmaster@dwtgluetape.com
Email: Gary@dwtgluetape.com
Mob.: +86 139 2600 2810
WeChat: garyhuang923
Add.: Guangzhou company Address: Room 1719, Wuyang New City Plaza, No.111 Siyou New Road, Yuexiu District, Guangzhou, China
Add.: Guizhou Factory Address: Opposite Guanfeng Village Committee (next to Industrial Road), HuangTong Street, Puding County, Anshun City, Guizhou Province
Sign In